* Specs for language detection
* Use CharlockHolmes instead of NKF
* Correct mistakes
* Correct style
* Set hint_enc instead of falling back and strip_tags
* Improve specs
* Add dependencies
* Changement de « Changement de mot de passe » en « Sécurité »
* Suppression de « (Two-factor auth) »
Change la valeur de la chaîne « two_factor_authentication » de « Identification à deux facteurs (Two-factor auth) » à « Identification à deux facteurs ».
La traduction anglaise entre parathentèse était redondante et gênait la lecture.
Change the value of the "two_factor_authentication" from "Identification à deux facteurs (Two-factor auth)" to "Identification à deux facteurs".
The English translation in brackets was superflous and was getting in the way of the reader.
* Remplace « ' » par « ’ »
Retire de la traduction les apostrophes droites « ' » (U+0027) au profit des apostrophes typographiques « ’ » (U+2019).
En typographie française, les apostrophes typographiques sont utilisées à la place des apostrophes droites. La traduction était jusqu’ici incohérente et utilisait les deux.
Remove from the translation all the vertical apostrophes (U+0027) in favor of the curly ones (U+2019).
In French typography, typographic apostrophes are used instead of vertical ones. The translation was incoherent and used both.
* Remplace « ... » par « … »
Remplace les séries de trois points par le caractère dédié « … » (U+2026).
Replace all the series of three dots by the dedicated character "…" (U+2026).
* Mise à jour
Crée config/locales/activerecord.fr.yml, ajoute de nouvelles chaînes et met à jour certains textes.
Les compteurs de caractères pour le pseudonyme et la biographie devrait maintenant pouvoir fonctionner même quand l’interface est en français.
Create config/locales/activerecord.fr.yml, add new strings et update some textes.
The caracters counters for the username and the biography should now work even when the interface is in French.
* Remplace « A » par « À »
Remplace « A » par « À » aux endroits où le mot est mal orthographié.
Replace "A" by "À" when the wrong word is used.
* Ajout d’espaces insécables
Ajoute des espaces insécables suivant les régles nécessaires en typographie française.
Add non-breaking spaces following rules of French typography.
* Remplace « certain » par « certain·e »
Harmonise la traduction en remplaçant « certain » par sa forme épicène.
Harmonize the translation by replacing "certain" (sure) by its epicene form.
* Corrige un angliscisme
Remplace « adresse e-mail » par « adresse électronique ».
Replace "adresse e-mail" (e-mail address) by "adresse électronique" (electronic address).
Ensure the only allowed author of top-level entries in feed is the person
the feed belongs to (a verified user). Ensure delete events only apply
if the deleted item belonged to that user.
The old implementation sets default From address in mailers. It sets
the address from SMTP_FROM_ADDRESS, or notifications@localhost. The
behavior is occasionally undesired results.
In production environment, notifications@localhost is likely to be
incorrect.
In testing environment, the email address should not be varied by a
environment variable.
After appling this change,
In production environment, it will throw an exception when launching
Mastodon.
In testing environment, the address will be fixed with
notifications@localhost.
* add a system_font_ui setting on the server
* Plug the system_font_ui on the front-end
* add EN/FR locales for the new setting
* put Roboto after all other fonts
* remove trailing whitespace so CodeClimate is happy
* fix user_spec.rb
* correctly write user_spect this time
* slightly better way of adding the classes
* add comments to the system-font stack for clarification
* use .system-font for the class instead
* don't use multiple lines for comments
* remove trailing whitespace
* use the classnames module for consistency
* use `mastodon-font-sans-serif` instead of Roboto directly
* Update links in status content on update as well as mount
Fixes occasional bugs with mentions and hashtags not being set to open in a new column like they should, and instead opening in a new page
* use classList instead of raw className
This fixes a warning on status unmounting (e.g. deletion).
This also resets IntersectionObserverWrapper on disconnect to avoid `unobserve()` calls
which has bug in Edge.
* Fix embedded SVG fill attribute
SCSS darken/lighten functions may not return a color value, but a color
name like "white". See following example:
https://www.sassmeister.com/gist/c41da93b87d536890ddf30a1f42e7816
This patch will normalize $color argument to FFFFFF style.
I also changed the function name from "url-friendly-colour" to
"hex-color", Because...
1. The name "url-friendly" is not meaningful enough to describe what it
does.
2. It is familier to me using "color" rather than "colour"
kojima:kojiMac mastodon[master]$ git grep -l colour
app/javascript/styles/boost.scss
spec/fixtures/files/attachment.jpg
kojima:kojiMac mastodon[master]$ git grep -l color
.rspec
.scss-lint.yml
Gemfile.lock
app/javascript/mastodon/features/status/components/action_bar.js
app/javascript/styles/about.scss
app/javascript/styles/accounts.scss
app/javascript/styles/admin.scss
app/javascript/styles/basics.scss
app/javascript/styles/boost.scss
app/javascript/styles/compact_header.scss
app/javascript/styles/components.scss
app/javascript/styles/containers.scss
app/javascript/styles/footer.scss
app/javascript/styles/forms.scss
app/javascript/styles/landing_strip.scss
app/javascript/styles/reset.scss
app/javascript/styles/stream_entries.scss
app/javascript/styles/tables.scss
app/javascript/styles/variables.scss
app/views/admin/subscriptions/_subscription.html.haml
app/views/layouts/application.html.haml
app/views/layouts/error.html.haml
app/views/manifests/show.json.rabl
bin/webpack-dev-server
config/initializers/httplog.rb
public/500.html
public/emoji/1f1e6-1f1e8.svg
public/emoji/1f1ec-1f1f8.svg
public/emoji/1f1f3-1f1ee.svg
public/emoji/1f1fb-1f1ec.svg
spec/fixtures/requests/idn.txt
yarn.lock
* Add semicolon
* Added Korean Translation (based on japanese)
* Update korean translation
* Update korean translation: fix syntax error
* Updated korean translation
* Update korean translation
* Update ko.json
Translate non-translated parts
* Update ko.yml
Translated missed parts - and fixed some typos
* Create simple_form.ko.yml
* Updated korean translation
* i18n: fix test fails
In from_redis method, statuses retrieved from the database was mapped to
the IDs retrieved from Redis. It was equivalent to order from high to low
because those IDs are sorted in the same order.
Statuses are ordered with the ID by default, so we do not have to reorder.
Sorting statuses in the database is even faster since the IDs are indexed
with B-tree.
* add missing locales for French translation
* accent "Media" in the front-end locales
* images => médias
* Change 'rapport' to 'signalement' in French locales to be more coherent
* fix typo
* remove duplicate EN locale
* translate missing locales
* update missing locale
* fix typo
* unify with "utilisateur⋅ice⋅s"
* address PR comments
* Use instance name in "password changed" mail
instead of "Mastodon".
Fixes tootsuite#2620.
* Use instance name in password reset mail
instead of "Mastodon".
* Fix#3910 - Require OTP authentication to disable 2FA. Also, remove ability
to generate new OTP backup codes *after* initial backup codes were handed
out during activation
* Restore recovery code re-generation
* Improve display of some 2FA elements
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Fix#2347 - Bind web UI access token to session
When you logout, session also destroys the access token, so it's no longer
valid. If access token is destroyed some other way, the session is also
destroyed, requiring a re-login.
Fix#1681 - Add scheduler to remove revoked access tokens and grants
* Fix test
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Introduce domains method to Account relation
Account had followers_domains method, which was excessively specific.
Let relation of Account have domains method instead.
* Move follow_mapping in Account to AccountInteractions
* Introduce shared examples for AccountAvatar inclusion
* Cover Account more
* Fix regression from #3842
Simplify the query by omitting all direct statuses. Private statuses
are allowed because they are from accounts we are following (so
by definition)
Resolves#3887 (alternative)
* Adjust test
(This patch has been merged as bugfix and reverted, but still valuable as
improvement)
Previously, we've attached IntersectionObserver twice for boosted statuses:
wrapper Status and wrapped Status. but wrapped Status don't need to manage
intersection and visibility by itself, because it's a part of wrapper Status.
* Revert "Bump version to 1.4.4"
This reverts commit 1585b0c6cc.
* Revert "Fix conversations (fixes#3869) (#3870)"
This reverts commit 15b43f555d.
* Revert "Fix streaming server. Redis connection subscribe for each channel. (#3828)"
This reverts commit d8ec832806.
* Revert "Filter direct statuses in Status.as_home_timeline (#3842)"
This reverts commit bab5a18232.
* Revert "Fix RemoteFollow behavior (#3868)"
This reverts commit a20cf3b64e.
* Revert "Update fabricator for MediaAttachment to attach a file according to type (#3862)"
This reverts commit 356df7ae6b.
* Revert "Upgrade React Router (#3677)"
This reverts commit 8f03fdce7f.
* Revert "Do not call setState from unmounted component (#3853)"
This reverts commit 1fc6cb4997.
* Revert "Replace TextIconButton for SensitiveButton to IconButton (#3759)"
This reverts commit eb832e88f4.
* Revert "Fix RTL detection on Ruby side (#3867)"
This reverts commit b16b69350e.
* Revert "i18n: Fixed typo in Polish translation (#3864)"
This reverts commit da6fa029f6.
* Revert "Don't attach IntersectionObserver for wrapped statuses (#3863)"
This reverts commit 94ad0706f5.
The classes using Status.as_home_timeline, namely Feed and
PrecomputeFeedService are expected to filter direct statuses as
FanOutWriteService does, but their filtering were incomplete or missing.
This commit solves the problem by filtering direct statuses in
as_home_timeline as the other similar methods such as as_public_timeline
does.
This fixes a bug that sometimes boosted statuses being hidden on scrolling.
Previously, we've attached IntersectionObserver twice for boosted statuses:
wrapper Status and wrapped Status. This will call intersection handler twice,
so this may results race condition...probably.
* Whitelist allowed classes for federated statuses
Allowed classes are currently:
- Any microformats class (h/p/u/dt/e-*)
- the classes mention, hashtag, ellipses and invisible.
this last one is somewhat suspect, but Mastodon currently uses it to render hidden link text.
resolved#3790
* Fix code style
mergeDeep also merges columns, but it should be replaced simply.
So in the new function, first apply mergeDeep except columns, and set default columns if columns unset.
* Make Pubsubhubbub::DistributionWorker handle both single stream entry
arguments, as well as arrays of stream entries
* Add BatchedRemoveStatusService, make SuspendAccountService use it
* Improve method names
* Add test
* Add more tests
* Use PuSH payloads of 100 to have a clear mapping of
1000 input statuses -> 10 PuSH payloads
It was nice while it lasted
* Add form for account deletion
* If avatar or header are gone from source, remove them
* Add option to have SuspendAccountService remove user record, add tests
* Exclude suspended accounts from search
* Fix#2619 - When redis feed is empty, fall back to database
* Use redis value to return feed from database only while RegenerationWorker
hasn't finished running
* Fix specs
* Replace usage of reject!
TagManager.local_url? was sometimes called with an URI with a nil host,
leading to a crash in TagManager.local_url?. This fixes moves the
already-existing uri.host.blank? check in front to avoid this case.
* Move ancestors/descendants out of timelines reducer
* Refactor timelines reducer
All types of timelines now have a flat structure and use the same
reducer functions and actions
* Reintroduce some missing behaviours
* Fix wrong import in reports
* Fix includes typo
* Fix issue related to "next" pagination in timelines and notifications
* Fix bug with timeline's initial state, expandNotifications
```
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:61)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:62)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:63)
```
Here's PR describing changes to Dirty API https://github.com/rails/rails/pull/25337
When case insensitivity is enabled via devise's `config.case_insensitive_keys` then `.find_for_authentication` method needs to be used instead of `.find_by` because second mentioned returns `nil` when valid email with different cases is passed.
More info https://github.com/plataformatec/devise/wiki/How-To:-Use-case-insensitive-emails
- Use plaintext
- Strip out URLs
- Strip out mentions
- Strip out hashtags
- Strip out whitespace from "overall" count
- Consistent between JS and Ruby
* Improve default language decision
This change allows to takes account of accepted language determined by
the user agent even if the custom default locale of the instance is
configured.
* Cover Localized more
* Fix code style
Each of mute, favourite, reblog has been updated to:
- Have a separate controller with just a create and destroy action
- Preserve historical route names to not break the API
- Mild refactoring to break up long methods
* Add specs for api statuses routes
* Update favourited_by and reblogged_by api routes
* Move methods into new controllers
* Use load_accounts methods to simplify index actions
* Clean up load_accounts methods
* Clean up link header generation
* Check for link headers in specs
* Remove unused actions from api/v1/statuses controller
* Remove specs for moved actions
* Move ApiController to Api/BaseController
* API controllers inherit from Api::BaseController
* Add coverage for various error cases in api/base controller
* Coverage for rate limit headers
* Move rate limit headers methods to concern
* Move throttle check to condition on before_action
* Move match_data variable into method
* Move utc timestamp to separate method
* Move header setting into smaller methods
* specs cleanup
Steps to reproduce the original issue:
1. Have two remote accounts, A that you don't follow, and B that you follow.
2. Have A post a toot and reply to it.
3. Boost A's reply from remote account B.
This used to cause the local instance to get A's reply but fail to link it to
the original post.
* Add regex filter on the community timeline and the public timeline
* correcting
* Adjust the height of header buttons
* Remove trailing spaces
* Remove trailing spaces
* Solve some code duplication
* reset the state of the locale files in app/javascript/mastodon/locales
* adjust to upstream
* adjust to upstream
* change keys of locale settings
* Sort results by the name
* Switch search method to simple `LIKE` matching instead of tsvector/tsquery
Previously we used scores from ts_rank_cd() to sort results, but it didn't work
because the function returns same score for all results. It's not for calculate
similarity of single words. Sometimes this bug even push out exact matching tag
from results.
Additionally, PostgreSQL supports prefix searching with standard btree index.
Using it offers simpler code, but also less index size and some speed.
* Try fixing ThreadResolveWorker calls
From my understanding of ActiveRecord, a transaction is commited as soon as
the exit of the outmost ActiveRecord.transaction block. However, inner
transaction blocks will exit without the transaction being commited.
In this case, ThreadResolveWorker were fired *within* a transaction block,
so moving the call out of it should do the trick. However, this is somewhat
fragile, as this whole codepath could be called within yet another transaction.
* Set status thread within the transaction block if it is immediately available from database
* Add a StatusFilter class to identify visibility of statuses by accounts
* Extract StatusThreadingConcern from Status
* Clarify purpose of checking for nil account
* Redirect to streaming_api_base_url
When Rails receives a request to streaming API, it most likely
means that there is another host which is configured to respond
to it. This is to redirect clients to that host if
`STREAMING_API_BASE_URL` is set as another host.
* Use the new Ruby 1.9 hash syntax
* i18n Update : Add preference setting for delete toot modal
Adding a line for "Add preference setting for delete toot modal"
* i18n update for pin/unpin
Update to add two more translations
* i18n update to have the dates in plain occitan
* Removed the blank line
* %{selft} back in the translation
* Do not fall back to StreamEntry if object_type is unavailable in TagManager
Since 6d6a429af8, when Status, the only model
with stream_entry, and StreamEntry got its own logic in uri_for and
url_for, the purpose of the fallbacks to activity_type of StreamEntry
became unclear.
This commit removes the fallbacks. When adding another model with
stream_entry in future, consider to update uri_for and url_for.
* Cover TagManager more
* Do not default the format in ProviderDiscovery
The format should be determined when discovering, as it is in the current
implementation, and it is a flaw if it is not determined.
* Spec ProviderDiscovery
* Allow mounting arbitrary columns
* Refactor column headers, allow pinning/unpinning and moving columns around
* Collapse animation
* Re-introduce scroll to top
* Save column settings properly, do not display pin options in
single-column view, do not display collapse icon if there is
nothing to collapse
* Fix one instance of public timeline being closed closing the stream
Fix back buttons inconsistently sending you back to / even if history exists
* Getting started displays links to columns that are not mounted
* Add redis key "subscribed:timeline:#{account.id}" to indicate active streaming API listeners exists.
* Add endpoint for notification only stream.
* Run PushUpdateWorker only for users uses Streaming API now.
* Move close hander streamTo(Http/Ws) -> stream(Http/Ws)End (Deal with #3370)
* Add stream type for stream start log message.
* zh-cn.json: "additional info" -> "more info"
This commit changes the "extended info" (about/more) text to something that translates to "more info", as "additional info" in zh can sound like appending things to the (ugh) navbar, I guess.
Or should I just change it to "about this site" (关于本站)?
* zh-cn.json: navbar.info -> "about this site"
* zh-臺灣.json: navbar.info -> "about this site"
This implementation is a bit smaller and still has the following benefits:
* No need of app/javascript/packs/custom.js
For custom stylesheet, it typically has only
"require('../styles/custom.scss')" and is redundant.
* No need to extract vendor stylesheet to another asset
Extracting vendor stylesheet could be forgotten by developers who do not
use custom stylesheet.
* Update rails to version 5.1.1
* Run `rails app:update`
* Remove the override of polymorphic activity relationship
* Silence warning about otp_secret attribute being unknown to rails
* We will only introduce form_with where we want to use remote data
* Add failing specs for hashtag and username extraction in language detector
* Remove usernames and hashtags from text before language detection
* Handle multiple instances of special case, and reduce whitespace
* Remove trailing whitespace in i18n mailers
* Use query methods instead of #present? on AR attributes
* Delegate Status#account_domain method
* Delegate Mention #account_username and #account_acct methods
* Move specs for account finder methods to concern spec
* Move account finder methods to concern
* Improve spec wording
* Use more explicit comparison to ensure correct return value
* Add coverage for .find_local! and .find_remote!
* Add some methods to the finder
* Use arel on matching_username method
* Avoid ternary in matching domain method
* Simplify finder methods
* Use an AccountFinder class to simplify lookup
* Set delete_modal preference to true by default
* Does not show confirmation modal if delete_modal is false
* Add ja translation for preference setting page
The combination of object-fit, relative position 50% from top and translating it
back upwards 50% is what allows us to crop the video properly, so it needs to
be +50%-50%
* Fix#2922 - Load stylesheet from "custom.css" entrypoint when present
This is pretty much the same way it worked as before, albeit with
having to create app/javascript/packs/custom.js with
require('../styles/custom.scss') (or whatever you want really), which
will be a blank slate for you to import whatever you want
* Remove old assets directory
* Extract font-awesome into common.css and always load it
* Update nl strings for 1.4
* Update nl strings for 1.4
* Update nl strings for 1.4
* nl strings (+1)
More new OTP strings will be translated another time
* Fix nil input not handled well in AuthorExtractor concern
* Fix hard error in ProcessFeedService when replied-to status has been deleted
* Fix nil errors in ProcessInteractionService when favourited status
cannot be found
because it may causes flicker on the conversation when it contains blocked/muted user's status.
We use `/api/v1/statuses/{id}/context` to obtain status ids in the
conversation which filters blocked/muted user, but also uses internal
cache constructed from `in_reply_to_id` by `normalizeStatus()` in
`reducers/timelines.js` on each status loading which doesn't filter.
So statuses appears in conversation if those are cached, even those
statuses are from blocked/muted user. Then context cache will be updated
with the result of the context API and those statuses will be removed.
I have left the `normalizeStatus()` function itself which is called many
functions in the file as a placeholder for now, but maybe it should be
removed completely.
In single user mode, visitors are redirected to the single user's
profile page. So, if you are the owner without a session, you start
from that page, click the login button and authenticate yourself
expecting you'll soon get started with the home page, but in reality
you'll get redirected back to where you started from -- your own
profile page.
This fixes the behavior by redirecting you home after login if you
have started from your own profile page.
I've found this issue when I clicked replies to muted user on the timeline.
Properties I've removed in here were added with lazy loading using
IntersectionObserver (8e4d1cba), but those statuses are not need to be
tracked anyway because it will be rendered as only empty div.
This will reduce requests on who have only few statuses.
- Use next link header to detect more items from first request
- Omit next link header if result items are fewer than requested count
(It had omit it only if result was empty before)
* @object is not needed
* Remove unneeded dependencies
* Do not call private method
* Prefer #respond_to_missing? over #respond_to?
`#respond_to?` doesn't support `User.settings.method(:method_name)`
* Use find_or_initialize_by instead of
* Add load more button for large screens
* Fix `next` state value on the first loading
* Don't load if `isLoading || !hasMore`
* Start load on near the bottom
Link headers in following/followers API should include follow_id as max_id/since_id.
However, these API use current_user's account_id instead of follow_id from #3167.
This causes irrelevant result on loading more users.
- Increase coverage to exercise all parts of each action
- Move into namespace to share common code
- Misc refactor of each action for smaller methods, simpler code
* Introduce recent scope to Status and StreamEntry
Introduce recent scope to Status and StreamEntry as Account has.
* Cover AccountsController more in AccountsController
* Only load Intl data for current language
* Extract common chunk only from application.js and public.js
* Generate locale packs, avoid caching on window object
* Persian translation update
* Persian translation update: new files
* Persian translation update
* activerecord.fa.yml language code
* Persian translation update
* fix indent
* refactor(components/status_list): Avoid quering scrollTop if not necessary
* refactor(components/dropdown_menu): Do not render items if not expanded
* refactor: Cherry-pick react-motion imports
* refactor(compose/privacy_dropdown): Do not render options if not open
* refactor(components/column_collapsable): Do not render children if collapsed
* Add buttons to block and unblock domain
* Relationship API now returns "domain_blocking" status for accounts,
rename "block entire domain" to "hide entire domain", fix unblocking domain,
do not block notifications from domain-blocked-but-followed people, do
not send Salmons to domain blocked users
* Add test
* Personal domain blocks shouldn't affect Salmon after all, since in this
direction of communication the control is very thin when it comes to
public stuff. Best stay consistent and not affect federation in this way
* Ignore followers and follow request from domain blocked folks,
ensure account domain blocks are not created for empty domain,
and avoid duplicates in validation
* Purge followers when blocking domain (without soft-blocks, since they
are useless here)
* Add tests, fix local timeline being empty when having any domain blocks
* feat(eslint): Set react/jsx-no-bind: error
* refactor(notifications/setting_toggle): Do not use bind
* refactor(components/dropdown_menu): Do not use bind
* refactor(components/autosuggest_textarea): Do not use bind
* refactor(compose/privacy_dropdown): Do not use bind
* refactor(compose/upload_form): Do not use bind
* refactor(components/status): Do not use bind
* refactor(components/onboarding_modal): Do not use bind
* refactor: PR feedback
* chore(notifications/setting_toggle): Lint
* refactor: PR feedback
The `params` variable here was quite overloaded.
It exists via the controller to hold the request params, and was sometimes being
used in this helper as that object, but other times was being used as a local
variable, or to pass to another method, and this was confusing.
This change renames the args for a method away from `params` for more clarity,
and extracts the actual usage of the controller-provided `params` to a
better-named method for clarity.
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
* Adding account domain blocks that filter notifications and public timelines
* Add tests for domain blocks in notifications, public timelines
Filter reblogs of blocked domains from home
* Add API for listing and creating account domain blocks
* API for creating/deleting domain blocks, tests for Status#ancestors
and Status#descendants, filter domain blocks from them
* Filter domains in streaming API
* Update account_domain_block_spec.rb
- add translation "Bon Appetoot!"
- add whitelist what doesn't require translation
- replace exclamation mark full width
- add space after question mark
- remove blank between words
- run yarn manage:translations
* fix(polyfil): Catch error from promise
https://pouchdb.com/2015/05/18/we-have-a-problem-with-promises.html
* fix(catch): Error
Make import promise catch a noop with commented out console.log for a debugging hint.
* fix(eslint): Disable eslint console rule
* fix(application): Use console error
* Always set `overflow: auto` to allow scroll just after opening
* Remove bounce animation which may cause unintended behavior due to max-height
* Use CSS transition instead of react-motion
* Some CSS refactoring including className changing
* Create common chunk rather than vendor chunk
vendor chunk is a set of modules provided by external vendors, but now we
can have a chunk as a set of modules shared by multiple entry points,
which could be more efficent than having vendor chunk.
* Start rails-ujs in common.js
This is used by /settings/two_factor_authentication.
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
From #2327 - Elephant friend was overlapping with text, oversized in
single column layout
From #2021 - Centered layout goes against design principles, changes
UX for everybody who's already used to the current one
From #2271 - CPU/RAM overusage from keeping columns in DOM (fix#2648,
possibly also #2101)
* Do not cancel PuSH subscriptions after encountering "permanent" error response
After talking with MMN about it, turns out some servers/php setups do
return 4xx errors while rebooting, so this anti-feature that was meant
to take load off of the hub is doing more harm than good in terms of
breaking subscriptions
* Update delivery_worker.rb
* Fix color contrast some more in privacy warning
Latest master appears to have changed the <strong> to this unreadable grey color. If you want that to be white then it should be pure white. If someone would rather revert this to that strong dark blue color it was before that would be good too.
* Make domain dark blue again
* add missing ;
woops
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Fix conversation migration
* More spec coverage for status before_create
* Prevent n+1 query when generating Atom with the new conversations
* Improve code style
* Remove redundant local variable
The current text contrast on the privacy warning is a WCAG violation. I didn't notice this because my instance has a custom theme which is better. On default theme I am barely able to read the text with my impaired vision. This patch brings the contrast to Normal Text WCAG AA compliance, and Large Text WCAG AAA compliance.
Use ES Class Fields & Static Properties (currently stage 2) for improve class outlook.
Added babel-plugin-transform-class-properties as a Babel plugin.
* Fix#2027 - Accept own ID for remote follow with and without preceding @
Fix#2177 - Omit leading "acct:" in remote follow redirect template expansion
* Fix test
Receiving instances will then use their own missing image
Also, add <content /> to deleted statuses, since there was a reported
problem with the deletes and GNU social
* Fix regressions from #2683
Properly format spoiler text HTML, while keeping old logic for blankness intact
Process hashtags and mentions in spoiler text
Format spoiler text for Atom
Change "show more" toggle into a button instead of anchor
Fix style regression on dropdowns for detailed statuses
* Fix lint issue
* Convert spoiler text to plaintext in desktop notifications
* services: scan spoiler_text for hashtags (#699)
* views: link hashtags from spoiler_texts
This covers linking hashtags from within the spoiler
text on the server-generated pages.
* services: fix string concat going into hashtag RE
Cleaner Ruby syntax, may handle immutable strings better
Compact Language Detector v3 (CLD3) is the successor of CLD2, which was
used in the previous implementation. CLD3 includes improvements since CLD2,
and supports newer compilers. On the other hand, it has additional
requirements and cld3-ruby, the FFI of CLD3 for Ruby, is still new and may
be still inmature.
Though CLD3 is named after CLD2, it is implemented with a neural network
model, different from the old implementation, which is based on a Naïve
Bayesian classifier.
CLD3 supports newer compilers, such as GCC 6. CLD2 is not compatible with
GCC 6 because it assigns negative values to varibales typed unsigned.
(see internal/cld_generated_cjk_uni_prop_80.cc) The support for GCC 6 and
newer compilers are essential today, when some server operating system
such as Ubuntu Server 16.10 has GCC 6 by default.
On the one hand, CLD3 requires C++11 support. Environments with old
compilers such as Ubuntu Server 14.04 needs to update the system or install
a newer compiler.
CLD3 needs protocol buffers as a new dependency. However,it is not
considered problematic because major server operating systems, CentOS and
Ubuntu Server provide them.
The FFI cld3-ruby was written by me (Akihiko Odaki) for use in Mastodon.
It is still new and may be inmature, but confirmed to pass existing tests.
ExtractTextWebpackPlugin extracts the content of loaded files, which means
it loads files loaded by require.context but not required after that.
However the former implementation is not aware of that.
require.context can have a RegExp to filter files to load. This change
gives a RegExp which matches with SCSSes with 'custom' prefix to
require.context to take advantage of the feature.
* Update fr.json
Updating some missing french translations.
* Update fr.json
Fix repetition in line 41.
* Update fr.json
Fix : adding space between {name} and ? question mark.
- Updates scss variables file to use better-named variables for black/white/etc
- Arranges the "mastodon classic" colors into variables
- Remove all references to `$color-*` naming, replacing with new
This does not in itself introduce "theme" support, but:
- It would probably be easier to start working on theme support after this
change and others
- Even without the goal of themes, these changes make it more clear how the
colors are being used.
There is almost definitely some edge case in here where I've guessed the
intent/context of some color usage incorrectly, but it still seems like a net
improvement.
* Updated Thai language
* locale: remove unused translation in Thai
* locale: add Thai to settings menu and application
* locale: fix activerecord.th.yml format
* Update ar.json
Adding more translations (updating the missing non translated strings) and some little minimal corrections.
* Update ar.json
Deleting final new line as suggested in the review.
* Update ar.json
* Update ar.json
* Call simple query
* Refactor Account#keypair
* Replace escaped single quote
* Extract similar behavior to method
* Gather the same condition to one block
* Remove not needed receiver
* Add Turkish yml file
* Add translation files for Turkish
* Deleted click_to_edit key and val
Deleted click_to_edit: Düzenlemek için ilgili ayara tıklayınız line
* follow the instructions for registering the language as stated on the Tootsuite's docs.
* Added translation strings from latest master
Adding ‏ characters to many strings that are misdirected in the interface.
A tiny grammar fix
Updates of Hebrew strings to v1.3.1
Hebrew translation of the mailer templates.
Fix strings and a missing comma.
Just discovered two string keys were updated. this should lay Travis' mind to rest at last.
Remove mentions before counting characters to decide RTL ratio
Fixes for PR #2573
updated strings for latest master
Undo RTL counting, moved out to another branch for future consideration...
* locale: added hr and oc react-intl locale data
* adds Croatian locale data in mastodon.js
* adds Occitan locale data in mastodon.js
Resolves#2667
* locale: sort locale data imports in mastodon.js
* locale: remove oc reference
* [react-intl](https://github.com/yahoo/react-intl) does not provide
default locale data for Occitan. Hence removed from reference.
* Added support options to the bottom right
I don't know if this is actually wanted, but I made these changes on my instance, so why not share it. Not wanted? No problem! BTW: Maybe the Mastodon image should leave here, cause there is no space left cause of the increased height of the getting started column.
* 2 paragraphs looks cleaner
* Update
* Good morning
* package.json: Add "build:*" targets
* Improve react-intl-translations-manager workflow.
* Added "build:production" to build production bundle.
* Added "build:development" to build development bundle.
* Fix json translation files
* Run `yarn manage:translations` to fix translation files.
* Fix `pl.json` for syntax error.
* translationRunner: auto detect existing languages
* Auto detect existing rfc5646 language tag in *.json filenames
in `app/javascript/mastodon/locale` folder. No need to manually
define every new language in the languages array here.
* translationRunner: add more functionality
* Allow script user to specify language code to check.
* Added available language check.
* Added --force flag to force creation of unexists language.
* Added --help flag and help messages.
* gitignore: ignore npm-debug.log
* Fix webpack error if NODE_ENV is not defined
Default to use 'development' in config/webpack/configuration.js
* Dont use raise_error by itself (avoids warning)
* Add coverage for AccountFilter
* Improve coverage and refactor for Subscription#lease_seconds
* Improve coverage and refactor for NotificationMailer
* Simplify assignment of min/max threshold on subscription
* Fix#2473 - Use sidekiq scheduler to refresh PuSH subscriptions instead of cron
Fix an issue where / in domain would raise exception in TagManager#normalize_domain
PuSH subscriptions refresh done in a round-robin way to avoid hammering a single
server's hub in sequence. Correct handling of failures/retries through Sidekiq (see
also #2613). Optimize Account#with_followers scope. Also, since subscriptions
are now delegated to Sidekiq jobs, an uncaught exception will not stop the entire
refreshing operation halfway through
Fix#2702 - Correct user agent header on outgoing http requests
* Add test for SubscribeService
* Extract #expiring_accounts into method
* Make mastodon:push:refresh no-op
* Queues are now defined in sidekiq.yml
* Queues are now in sidekiq.yml
* ui: check spoiler_text against regex filter (#1635)
When filtering by regex, also check the spoiler_text if
present.
* ui: concatenate spoiler and content in reducer
Simplifies aa5b03c, clarifies intent of the field
* When streaming API is disconnected, poll home/notifications
Display slightly different empty home timeline message if user is following others
Cull notifications to 20 items when over 40 get added in real-time
Run manage:translations
* Optimize <HomeTimeline /> a little
* Likely fix#2458, fix#2031 - handle out-of-order deletes for statuses
If a delete arrives before the original status, cache that information
for 6h, and if the original status arrives in that window, ignore it
* Add test case
Fix#2196 - Respond with 201 when Salmon accepted, 400 when unverified
Fix#2629 - Correctly handle confirm_domain? for local accounts
Unify rules for extracting author acct from XML, prefer <email>, fall back
to <name> + <uri> (see also #2017, #2172)
* Update zh-CN translations.
* Update doorkeeper.zh-CN.yml
* Follow @Artoria2e5 's change advices.
* forget mail for text format ......
* fix some changes
* mail's html version ......
* https://github.com/tootsuite/mastodon/pull/2699#pullrequestreview-35982283
* a space.....
* delete some unused keys
* Replace browserify with webpack
* Add react-intl-translations-manager
* Do not minify in development, add offline-plugin for ServiceWorker background cache updates
* Adjust tests and dependencies
* Fix production deployments
* Fix tests
* More optimizations
* Improve travis cache for npm stuff
* Re-run travis
* Add back support for custom.scss as before
* Remove offline-plugin and babili
* Fix issue with Immutable.List().unshift(...values) not working as expected
* Make travis load schema instead of running all migrations in sequence
* Fix missing React import in WarningContainer. Optimize rendering performance by using ImmutablePureComponent instead of
React.PureComponent. ImmutablePureComponent uses Immutable.is() to compare props. Replace dynamic callback bindings in
<UI />
* Add react definitions to places that use JSX
* Add Procfile.dev for running rails, webpack and streaming API at the same time
* follow the instructions for registering the language as stated on the Tootsuite's docs.
* Added translation strings from latest master
Adding ‏ characters to many strings that are misdirected in the interface.
A tiny grammar fix
Updates of Hebrew strings to v1.3.1
Hebrew translation of the mailer templates.
Fix strings and a missing comma.
Just discovered two string keys were updated. this should lay Travis' mind to rest at last.
Remove mentions before counting characters to decide RTL ratio
Fixes for PR #2573
updated strings for latest master
Undo RTL counting, moved out to another branch for future consideration...
* add annotate to Gemfile
* rails g annotate:install
* configure annotate_models
* add schema info to models
* fix rubocop to add frozen_string_literal
* Add coverage for create with empty acct value
* Add coverage for create with webfinger failure
* Add coverage for create with webfinger providing bad values
* Add coverage for create when webfinger is good
* Add coverage for session[:remote_follow] having data
* Simplify how remote follow pulls acct from session
* Remote follow behaves more like model
* Move the discovery portions of remote follow out of controller
* Check for suspended accounts
* Added Italian Translation of the following files:
Changes to be committed:
new file: app/views/user_mailer/confirmation_instructions.it.html.erb
new file: app/views/user_mailer/confirmation_instructions.it.text.erb
new file: app/views/user_mailer/password_change.it.html.erb
new file: app/views/user_mailer/password_change.it.text.erb
new file: app/views/user_mailer/reset_password_instructions.it.html.erb
new file: app/views/user_mailer/reset_password_instructions.it.text.erb
* Added italian translation
Changes to be committed:
new file: config/locales/activerecord.it.yml
* fix(dropdowns): Allow for dropdowns to fill full column
When the text inside a dropdown is longer than it is for English, the text is truncated which can result in a less-than-usable experience for languages such as German with longer words. This commit addresses the following:
* Allow the dropdown to expand to the entire width of the column based on the length of the text in the dropdown
* Align active dropdown arrow in relation to the trigger rather than the dropdown
* Show the right hand side of the dropdown which was previously hidden (could not see border radius)
* Ensure the three places dropdowns of status, account, and emoji appear well in Chrome, Firefox, Safari
* fix(emoji-dropdown): Restore emoji dropdown caret
* Naive approached to timeline filtering
* Convert allowed_languages into a db column
* Allow users to choose languages to see statuses in
* Style list items as two columns
* Add a hint to explain language filtering preference
* update id.jsx file
* update id.yml for new strings and improvements
* add activerecord.id.yml
* improve translation that out of context
* fix another ooc string
* fix main key
* Changement de « muets » en « silencés »
Utiliser le mot « muet » donne la fausse impression que ces comptes ne diffusent juste rien. Utiliser le mot « silencé » met l’accent sur le fait que ceci résulte d’une action de l’utilisateur·rice.
By using tho word "muet" (mute), we give the false impression that this accounts don't publish anything. Using the "silencé" (muted) put emphasis on the fact that this is the result of one of the user's action.
* Remplacement de « ' » par « ’ »
En français, l’apostrophe utilisée est une apostrophe courbe « ’ » (U+2019) et non pas une apostrophe droite « ' » (U+0027). La plupart des chaînes utilisaient une apostrophe droite. Ce commit harmonise le type d’apostrophe utilisé en remplaçant toutes les apostrophes droites par des apostrophes courbes.
In French, the apostrophe used is the curly one (U+2019) and not the vertical one (U+0027). Almost all the strings used a vertical apostrophe. This commit harmonize the kind of apostrophe used in the French localization by replacing all the vertical apostrophes by curly apostrophes.
* Remplacement de « ... » par « … »
Certaines chaînes utilisaient trois points d’affilié afin de représenter les points de suspension au lieu d’utiliser le caractère dédié « … » (U+2026). Ce commit harmonise la façon de représenter des points en remplaçant toutes les séries de trois points par le caractère dédié.
Some chains used a series of three dots to show the ellipsis instead of using the dedicated character "…" (U+2026). This commit harmonize how the ellipsis is shown in the French localization by replacing all the series of three dots by the dedicated character.
* Ajout d’un point final
Il manque un point à la fin de la dernière phrase de la chaîne « compose_form.privacy_disclaimer ». Ce commit le rajoute.
The last sentence of the "compose_form.privacy_disclaimer" string is missing a final dot. This commit will add it.
* Retrait d’un « s » final à « Mastodon »
Suite à la remarque de @wxcafe, retrait du « s » final à « Mastodon ».
Following @wxcafe comment, this commit remove the final "s" in the word "Mastodon".
* Add coverage for admin/confirmations controller
* Coverage for statuses controller show action
* Add coverage for admin/domain_blocks controller
* Add coverage for settings/profiles#update
* fix(video): Position of play icon
#2601
* fix(overlay-button): Positioning
* fix(expand): Bottom align expand icon
* feat(video): Fit landscape videos into preview area
Follow-up to #2599. When a domain block with `reject_media` is
added or `rake mastodon:media:remove_remote` is invoked, mastodon
deletes the locally cached attachments and avatars but does not
reflect that change in the database, causing the `file` fields to
still have values. This change persists the deletion in the
database and sets the attachment type to unknown.
This also introduces a one-off rake task that sets all attachments
without a local file to the "unknown" type. The upgrade notes for
the next release should contain a post-upgrade step with
`rake mastodon:media:set_unknown`.
In #2110, a new attachment type "unknown" was introduced for
attachments that were rejected due to a domain being blocked using
reject_media. However, the "type" field was never set to "unknown"
because a default value of "0" (image) is set for that column,
causing the `type.blank?` expression to always equal false.
This version uses type_changed? instead, causing the type to be set
to "unknown" unless a type has been explicitly set. This introduces
a small change in behaviour causing the type to be set to unknown
before paperclip calls `before_post_process`. Presumably this
behaviour is more appropriate than the current one because the
attachment type has not been determined by that point.
Included are new tests for `ProcessFeedService` and
`UpdateRemoteProfileService` which now check that remote media is
downloaded for non-blocked domains and is rejected for others.
* Minor updates to zh-CN JS translation
* removed "!" from "toot" per #2549 (it's a privacy indicator)
* ellipsis work (from ... to some U+2026 horizontal ellipsis unicode stuff)
* Spillcheck for zh-CN js translations (squash this)
部 [份→分]
* Add render_views in more places
* Delegate methods from account to user with allow nil true, so that admin accounts show view renders when missing a user
* Use actual account instances in authorize follow controller spec
* Add rough outline of coverage needed for public timeline
* Specs for visibility, replies, boosts
* Specs for silenced account
* Specs for local_only option
* Specs for blocks and mutes
* Add tentative spec around including other silenced account statuses
* Add with_public_visibility scope
* Add simple coverage for tag_timeline
* Tag timeline includes replies
* Replace tag.statuses with a tagged_with scope in tag timeline method
* Use with_public_visibility in tag timeline
* Extract common scope between public and tag timelines to method
* Extract local domain check to local_only scope
* Extract local_only check to starting scope method
* Move list of excluded from timeline account ids to account model
* Simplify excluded accounts list on account model
* Only join accounts when needed
* Rename method for account specific filtering
* Extract method for account exclusions
* Fix bug where silenced accounts were not including statuses from other silenced accounts
* DRY up filter application from account or no account
* timeline_scope can be private
* Add spec showing that account can find its excluded accounts ids
* Add spec which fails if local_only does not have a left outer join
* rubocop
In #2505, the authorize_follow views were renamed to
authorize_follows. This change was not applied in the show view
of admin/reports, which causes a 500 when reports are viewed.
* Instead of parsing shared status contents verbatim, make roundtrip
to purported original URL. Confirm that the "original" URL is from the
same domain as the author it claims to be from.
* Fix obvious typo, add comment
* Use URI look-up first
* Add test, update Goldfinger dependency to make less useless HTTP requests per Webfinger lookup
* OEmbed support for PreviewCard
* Improve ProviderDiscovery code failure treatment
* Do not crawl links if there is a content warning, since those
don't display a link card anyway
* Reset db schema
* Fresh migrate
* Fix rubocop style issues
Fix#1681 - return existing access token when applicable instead of creating new
* Fix test
* Extract http client to helper
* Improve oembed controller
* Fix syntax error
* Remove two_factor_auth.warning (appears obsolete)
* Add missing strings in ru.yml
A lot of new strings translated, especially for the newly added admin section
* Update Russian translation
* Fix merge conflicts
Redid Works by @rkarabut
* Add coverage for domain block service with silence
* Get rid of warning about find_each and order
* Move domain_block to attr_reader
* Move optional clear_media into silence_accounts method
* Use blocked_domain method to reduce passed vars
* Extract blocked_domain_accounts method to find accounts on the domain
* Extract media_from_blocked_domain method to find relevant attachments
* Separate destruction of account images and account attachments
* Fixes#1985
- add migration AddMediaAttachmentMeta, which add meta field to media_attachments
- before saving attachment, set file meta if needed
- add meta in api
* add spec
* align the “size” format for image and video
* fix code climate
* fixes media_attachment_spec.rb
Closestootsuite/mastodon#1349
This is my first PR and I’m only checking in the source JSX file.
Please let me know if it should be checked in after being built also.
* Stricter whitelist rules
* Linting
* Added spec for blacklisting
* Test subdomain blacklist on domain whitelist
* No need to split
* Change spec name
Set status action bar to have display flex and center align items so dropdown icon appears center aligned with other icons. Make styles alpha organized.
Add hover state to boost icon - lighten color on hover.
This PR fixes I18n.locale for rake middlewares. Mastodon uses Devise that depends on Warden.
Warden::Manager can be found in rake middleware. It is outside of the controller.
In the case of authentication failed, warden calls throw(:warden). At the time Warden::Manager
delegates request to failure_app to generate response and flash[:alert] after catching it.
Unfortunately, I18n.locale is already reset then because I18n.with_locale is enabled only
inside the controller. If we used I18n.locale=, Devise::FailureApp could get the current locale.
* Change ActivityPub paging to match spec. Clean up ActivityPub outbox changes.
* Fix code style and test failures for OutboxController.
* Attempt to fix CI errors.
duplicates. Web UI regenerates UUID for that header every time the compose
form is changed or successfully submitted
Also, fix Farsi i18n overwriting the English one
* Fix#2119 - Whenever about to send a HTTP request, normalize the URI
* Add test for IDN request in FetchLinkCardService
* Perform IDN normalization on domains before they are stored in the DB
* fix(upload): Only show upload modal when drag even contains files
* fix(firefox): Close drag window ondragend also
Do not only end drag styles on drag leave, but also on drag end. Fixes firefox bug. #687
* fix(drag-modal): Remove drag modal trigger cruft
* fix(upload-modal): Allow close with escape button
* Add failing spec for oauth/authorized_applications controller
* Use explicit reference to flashes partial from admin layout
Because some of the controllers which use the admin layout do not inherit from
application controller, this partial is not in their view path.
* Expose media attachments on reported statuses directly
* Comment out unused bulk report checkbox. Add title to report comment for viewing full comment. Add 'contents' column, with icons and numerical indicators to show the number of referenced statuses and media attachments in the report
* Link account name on authorize_follow card back to account
* Add localisation string for report_contents
* Show new admin accounts card partial on report view. Apply simple_format to report comment so newlines are preserved.
* Add new admin accounts card partial, for display quick useful admin stats (e.g. report history, moderation status).
* Fix localized variable
* Make private toots get PuSHed to subscription URLs that belong to domains where you have approved followers
* Authorized followers controller, stub for bulk action
* Soft block in the background
* Add simple test for new controller
* Rename Settings::FollowersController to Settings::FollowerDomainsController, paginate results,
rename "private" post setting to "followers-only", fix pagination style, improve post privacy
preferences style, improve warning style
* Extract compose form warnings into own container, show warning when posting to followers-only with unlocked account
Float detailed status display avatar left. Only apply display block to display names in status info, not in detailed status. Thanks to @nightpool for finding those. Make star icon in notification show up as gold. Add anchor selector back to status__content__spoiler-link in order to override default anchor style elsewhere.
Add an ID to the CW spoiler input field to give aria-controls a handle on it. Pass that id to the CW trigger button. Modify text icon button component to accept aria controls id value. Add aria-expanded value to text icon button to indicate when it is expanded.
* Add failing spec showing that human_locales does not match what i18n knows about
* Add missing `ar` key for arabic to human locales
* Remove duplicate `id` key from available locales
* Sort keys in human locales list
* Add spec for human_locale helper
This provides a hotfix for outbound salmon requests to other Mastodon instances
as they currently will try to resovle user@WEB_DOMAIN instead of user@LOCAL_DOMAIN
(see #2012 and #20312).
Furthermore, this should ease transition from users switching from
LOCAL_DOMAIN = WEB_DOMAIN to another LOCAL_DOMAIN when WEB_DOMAIN does not change.
Put Column Slim Back Button classnames in order so it is positioned right and top. Add icon button style back to privacy dropdown and upload buttons so they are positioned correctly and do not wiggle. Remove abstracted style from CSS. Add missed class for the upload form thumbnail. Add the missed styles for upload form thumnail. Alphabetize styles for column-back-button. Fix fontSize typo for media-spoiler-video-play-icon.
The two methods `StreamEntriesHelper#stream_link_target` and
`StreamEntriesHelper#acct` are based on checking whether we are running
in an embedded view.
This adds some test helper code to make the testing easier. We extracted
some "magic strings" to constants to lower the coupling in the specs.
The code that generates CSS is based on a lot of boolean conditions.
The possible combinations of these grows exponentially as we add more
conditions.
Since most of the code is conditional on a single boolean, we tested the
following:
1. All `false`
2. All `true`
3. Each individual flag set to `true`
The methods tested are:
* `StreamEntriesHelper#style_classes`
* `StreamEntriesHelper#microformats_classes`
* `StreamEntriesHelper#microformats_h_class`
* Made tooltip for boosting depend on visibility
* Removed spaces that were added in merge conflict resolution
* Try again :P
* Added missing bracket
* Changed 'toot' to 'status'
* Clean up collapsible components
* Expose user Outboxes and AS2 representations of statuses
* Save work thus far.
* Fix bad merge.
* Save my work
* Clean up pagination.
* First test working.
* Add tests.
* Add Forbidden error template.
* Revert yarn.lock changes.
* Fix code style deviations and use localized instead of hardcoded English text.
* Shows confirmed status in list.
* Adds ability to confirm users in admin UI.
* Added new english translations.
* Addresses feedback from #2245.
* More feedback.
- Deleting a toot
- Muting, blocking someone
- Clearing notifications
Remove source map generation from development environment, as it is a huge
performance sink hole with little gains
The previous translation for NSFW, "不適切" means "impertinent". This change
suggests "閲覧注意", which means the content requires precaution, instead.
However, "閲覧注意" was also a translation for CW. CW is now translated as
"警告", which simply means "warnings".
* fix(classnames): Status icon style classnames
Take out inline css and put into classnames for the following components: account, avatar, icon button, status action bar, notification.
* fix(status): Move styles from inline to classes for statuses
Move styles to classnames in components.scss for the following components:
display name
media gallery
status
status content
video player
* fix(classnames): Add classnames to rest of components
Take out inline styles and apply them to classnames in the sass for the following components:
button
column back button
slim column back button
collapsable column
dropdown menu
loading indicator
status list
* fix(classnames): Remove all non-dynamic inline styles
Components affected:
autosuggested
permalink
action bar
header
character counter
compose form
emoji dropdown
privacy dropdown
reply indicator
upload form
account auth
followers
getting started
column settings
mutes
settings
reblogs
status checkbox
report
action bar
status
card
boost modal
media modal
video modal
* fix(permalink): Do not lose classname
* fix(tests): Add space back in display name
* fix(status__wrapper): Remove duplicate css name
Remove incorrect style attribute. Remove style attribute all together. Cursor defaults to "auto" when not specified as 'default'.
* fix(nl): do not lose translations
The force_ssl method from controllers does not add all of the options that the
sitewide configuration in a config block does. For example, HSTS enforcement is
not added by the controller method, but is added by this style.
* feat(aria): Add aria-labels to underlabelled tab nav items
The drawer tabs which control primary navigation are only labelled by a title which is not available to many screenreaders. Add an aria-label attribute to each link to improve readability with screenreaders. Organize link attributes so link target is first followed by classname.
Issue #1349
* feat(aria): Replace abstract aria role of section with region
Abstract aria roles such as section should not be used in content. Use non-abstract 'region' aria role instead. That role expects an aria-labelledby attribute with an id. Pass an ID to the column header. Remove the aria-label attribute on the ColumnHeader because the same value is output in plaintext as its child.
Issue #1349
* fix(aria): Remove aria-controls attribute until solution is found
Columns do not have wrappers, so these icons can't point to a column wrapper which it controls. Instead these icons function as triggers to show or hide individual columns.
#1349
* fix(typo): Remove type of aria-labelledby instead of aria-label
* Add spec coverage for settings/two_factor_auth area
* extract setup method for qr code
* Move otp required check to before action
* Merge method only used once
* Remove duplicate view
* Consolidate creation of @codes for backup
* Move settings/2fq#recovery_codes to settings/recovery_codes#create
* Rename settings/two_factor_auth#disable to #destroy
* Add coverage for the otp required path on 2fa#show
* Clean up the recovery codes list styles
* Move settings/two_factor_auth to settings/two_factor_authentication
* Reorganize the settings two factor auth area
Updated to use a flow like:
- settings/two_factor_authentication goes to a #show view which has a button
either enable or disable 2fa on the account
- the disable button turns off the otp requirement for the user
- the enable button cycles the user secret and redirects to a confirmation page
- the confirmation page is a #new view which shows the QR code for user
- that page posts to #create which verifies the code, and creates the recovery
codes
- that create action shares a view with a recovery codes controller which can be
used separately to reset codes if needed
* Fix#1057 (close#1819) - Move HTML-formatted bio from <poco:note /> to <summary type="html" />
* Ensure <poco:note /> is plaintext for remote accounts, also, by stripping out HTML
* add Indonesian (Bahasa Indonesia) translation
add id.jsx
add translations on email views
add devise.id.yml
add doorkeeper.id.yml
add id.yml
add simple_form.id.yml
update id locale on mastodon.jsx, index.jsx, settings_helper.rb, and
application.rb
* add Indonesian (Bahasa Indonesia) translation
add id.jsx
add translations on email views
add devise.id.yml
add doorkeeper.id.yml
add id.yml
add simple_form.id.yml
update id locale on mastodon.jsx, index.jsx, settings_helper.rb, and
application.rb
* fix InvalidLocaleData on a string
* fix InvalidLocaleData on a string
* Fix language keys in Indonesian ruby locale (id)
Use "id" instead of "en" as object keys.
* Removed obsoleted translation (id)
For the 'time ago' value of stream entry simple statuses and the timestamp value
of detailed statuses - output their UTC value and use the browser timezone to
convert locally.
This commit fixes hashtag_html so it correctly handles matches with multiple hash-signs.
Bug located by @over9001, initial fix suggested by @nightpool.
Fix#2199 and minifying assets file.
jQuery v1.x is supports legacy browsers.
But, Mastodon does not support legacy browsers.
I think jQuery v1.x is unnecessary.
* A bit of more explanation
* Update nl.yml
* That's more elegant
* More consistent and adding missing translation
* Update
* Update
* Added Dutch onboarding modal strings
* Repair most egregious mistakes
The deployed changes broke the pedagogy and curriculum built into the design of the onboarding modals, which had been reviewed and approved by various other contributors. While the changed layouts of the pages make some of the original decisions impossible to re-implement without substantial work, these changes should at least make the modals not outright terrible.
The empty confusing description of Mastodon was replaced with an actual basic explanation of federation. The language was modified to be friendly and conversational again. Grammatical errors were fixed. The explanations of local and federated timelines were re-ordered to be in the direct that the menus go, top to bottom, and the sentence was re-added which explains that they are what "public timelines" refers to (since this phrasing is used elsewhere in the UI) and suggests the user use them to discover who to follow. A figure of the profile picture that lives above the compose box was padded to page two to serve as a landmark for less technically literate users to easily find the compose box and understand that the next page is moving upwards, so that they can find the search bar.
Ideally, the elephant artwork should be either removed or replaced with something less depressing. Room should be made to point users at the notifications column's settings icon because "how do I turn off the notification noise" is one of the most asked questions of new users and those icons are not easily noticeable. This last part may be made obsolete if the settings UI is later re-worked.
* Change copy
This commit addresses copy change suggestions made in the PR discussion
* Add periods to ends of sentences missing periods
* Made "Home" "Federated" "Local" and "Notifications" lowercase
* Separate explanation of "connecting" and the word "instance" into two sentences, to make the sentence less dense.
* Alphabetically order translation keys
* Fix some missing gender neutral translations in french
* Add a comment to remind contributors to order translations by key
* Add render_views for admin/settings spec
* Add coverage for admin/settings#update
* Add coverage for admin/settings typecasting open_registrations setting
* Simplify how admin/settings finds the value for updating
* Rely on activerecord to not update a value that hasnt changed
* Add coverage for non-existent setting
* Use a constant for boolean settings
* Fix#2108 - Fix gif uploads
Add specs for media attachment gifv conversion
* Add ffmpeg to travis
* Make travis install ffmpeg, not libav
* Switch travis to trusty
* Add meta tags for OGP to following & follow page
* simplify render helper
* Follow up #2133
* og:type is only accounts/show
* revert accounts/{following,followers}
* enable to scroll the setting's page sidebar
add scroll:auto and use margin instead of padding for the bottom
* Update admin.scss
* Update admin.scss
* Update admin.scss
* Add routing specs for accounts followers and following actions
* Use more restful route naming for public account follow pages
Moves two actions:
- accounts#followers to accounts/follower_accounts#index
- accounts#following to accounts/following_accounts#index
Adds routing spec to ensure prior URLs are preserved.
* Extract detect_language to separate class
* Use default locale, not just en
* Add spec to confirm that whatlanguage cant identify empty string
* Allow account locale to override default in language detector
* PostStatusService supplies an account to detect language
* Polish zh-cn js translation
* fixes for problems pointed out by gumblex in #2044
* more effectively differentiate between following/follower
* Fix missing period (zh-cn js)
Maybe squash this commit?
* Fix duplicate word (zh-cn js)
* Add a ReportFilter class
* Add reports and targeted_reports relationships to Account
* Use ReportFilter from admin/reports controller
* Link to admin/reports filtered views from admin account show view
* Add indexes to reports.account_id and reports.target_account_id
* Added oc.yml
* Added `config/locales/oc.yml`.
Translated in General Occitan (Quent-in).
* Added oc.jsx (Occitan translation)
* Written in General Occitan (lengadocian)
* Added `app/assets/javascripts/components/locales/oc.js`
* Added doorkeeper.oc.yml
* Added `config/locales/doorkeeper.oc.yml` (Quent-in)
* Added simple_form.oc.yml
* Added `config/locales/simple_form.oc.yml` (Quent-in).
* Merge en.yml changes into oc.yml
Added new strings for translations
* Fix typo in oc.yml
* Update javascript locale support (oc)
* Update ruby locale list (oc)
* Fix oc.yml
* Remove obsoleted translations
* Moved old translation of `reports` to `admin.reports`
* Remove unused method #set_counters_maps from api controller
* Remove unused method #set_account_counters_maps from api controller
* Remove unused method Account#followers_domains
* Remove unused User.prolific scope
* Add mastodon:users:admins task to list all admin emails
* Use interpolated query style in Account.triadic_closures
* Coverage for Account.triadic_closures
* Add FR locale for the onboarding modal component
* Slightly increase the max-width and max-height of the onboarding modal
This is done so it doesn't break with locales whose strings would be
too long
* Update FR locales for onboarding upon PR comments
This single-file commit, heavily based on the zh-hk version as of
ec9999c, fixes the missing js locale. Intentional, significant
departures from current zh-cn yml localizations have been marked with
rationales given.
* Move site title helper to instance helper (name change only)
* Remove newline in <title> tag
* Add site_hostname helper method to wrap up local_domain value
* Use site_hostname helper in places that need local_domain value
* Fixed some words
* Improved and more consistent
* Fixes and a bit less 'je'
* Improved and more consistent
* Another round of improvements and consistency
* More improvements and less 'je'
* Update
* Updated with admin strings
* More improvements and additions - not complete yet, but most is there
* This is what we call in Dutch 'the English disease' :-)
* fix comma
* admin.reportsi
* not needed
* hopefully now fixed
This change includes:
- Improve the spec coverage for incoming request to the webfinger action
- For requests without an accept header (ie, what a browser might look like),
return a JSON response.
- For requests with an explicit format of xml or json, return that format.
- For requests using an accept header, return that format.
Also adds failing spec showing webfinger does not return xml, which covers the
issue described in: https://github.com/tootsuite/mastodon/issues/1983
Un utiliser mal expérimenté pourrait comprendre "retirer les erreurs".
Ici il s'agit d'une suppression pure et simple, pas une épuration/nettoyage.
clear would be translated "remove" instead of "cleaning" Cleaning can be unterstood "keep but clean"
This introduces a new per-user preference called
"Auto-play animated GIFs", which is enabled by default. When a
user disables this setting, gifs in toots become click-to-play.
Previews of animated gifs were changed to display the video play
button so that users can distinguish them from regular images.
This setting also affects account avatars in the detailed account
view, which was changed to use the same hover-to-play mechanism
that is used for animated avatars in timelines.
Fixes#1652
* Remove overflow because it blocks scrolling on mobile safari.
* Add “-webkit-overflow-scrolling: touch;” to enable smooth scroll on mobile safari and other webkit browsers.
* Use radio buttons in user setting page.
Because select tags with long text are not fit in the width of mobile devices.
* Add flex property to fit labels to devise width.
* Change font size of select.
It causes auto zooming on mobile safari.
* reduce unneed query when post without attachements.
This commit reduce following query:
```
MediaAttachment Load (0.9ms) SELECT "media_attachments".* FROM "media_attachments" WHERE "media_attachments"."status
_id" IS NULL AND 1=0 ORDER BY id asc
```
* fixed for more simple changes.
* Add language detection via WhatLanguage and (de)serialization of it through Atom
* Fix default language in ProcessFeedService
* Re-add newline before 'react-rails' Gem to fix groupings
Fixes Code Climate issue
* Basic onboarding modal that's shown to users once
* Lay out pages 2 through 5, add images, style modals (#1509)
* Lay out pages 2 through 5
Added images and laid out pages 2 through 5 in the jsx file. SCSS will
come, still working on just seeing if this works at all.
* Fix jsx errors, add images to modal pages, style modal pages
* Add animations to onboarding pager changes, improve wording and styling
* Finishing touches on the onboarding
* Add missing propTypes
* Update wording
* Rename admin.domain_block to admin.domain_blocks in prep for i18n improvement
* Use implicit controller/action path for i18n in admin/domain_blocks
* Add DomainBlock#accounts has_many
* Avoid i18n health warning for `en` locale by using symbol scope with :count
* Remove unused i18n key: plaintext_secret_html
* Remove unused i18n key two_factor_auth.warning
* Remove final will_paginate i18n keys
* Remove unused key two_factor_auth.recovery_codes
* Remove unused key: admin.reports.comment.none
* Remove unused reports. i18n namespace (moved to admin.reports)
* Ignore keys from locales which override activemodel and activerecord errors
* Revert "Remove unused key: admin.reports.comment.none"
This reverts commit 350ef2685fadc069e619bb6d1066190de195d942.
* Update i18n key reference to match moved location
* Add missing `en` keys to i18n
* Tell i18n-tasks to ignore missing attributes that dont need overwriting
* Add i18n-tasks unused to travis
The <link rel="mentioned" /> tag refers to accounts by href. So we were
matching the DB by the url attribute, and falling back to HTTP look-up.
However, GS and Mastodon use profile URLs as URIs, too, and the match
for that was missing. This could potentially alleviate some extra network
requests
Create MediaAttachment but without actual file download when domain is blocked with reject_media set to true
Clean up old media files when creating a new domain block with reject_media set to true
Return remote_url in media attachments API if local file is not present
Undo domain block action in admin UI
Ability to enable reject_media from admin UI
* User can create a custom.scss to customize their instance without modifying gitted files.
* Add documentation for customization.
* Forgot the helper file
* Fix Style to pass codeclimate
* Requests from maintainer.
An attempt to open a brand new Mastodon instance configured
as SINGLE_USER_MODE=true will cause an exception.
Enable temporary registration if we have no users in the database
Fixes#1817
* Add eslint-plugin-jsx-a11y.
* Fix npm script.
* Adjust npm scripts so test also runs lint.
* Fix existing lint errors.
* Don't break on a11y issues.
* Add role and tabIndex.
* Add vim and Mac files to .gitignore and .dockerignore.
* Handle htmlFor (partially), a that's actually a button.
* Fix missing tabIndex.
* Add cursor:pointer to load-more
* Revert change to load_more.
* Fixes based on review.
* Update yarn.lock.
* Don't try to install fsevents on Linux (hides warning noise).
* Add recovery code support for two-factor auth
When users enable two-factor auth, the app now generates ten
single-use recovery codes. Users are encouraged to print the codes
and store them in a safe place.
The two-factor prompt during login now accepts both OTP codes and
recovery codes.
The two-factor settings UI allows users to regenerated lost
recovery codes. Users who have set up two-factor auth prior to
this feature being added can use it to generate recovery codes
for the first time.
Fixes#563 and fixes#987
* Set OTP_SECRET in test enviroment
* add missing .html to view file names
* Begin coverage for account search service
* Coverage for hashtag query
* Coverage for calling local vs remote find based on domain presence
* Spec to check that exact matches are not duped
* Coverage of resolve option
* Coverage for account being provided
* Start to refactor account search service
* Isolate query username and domain methods
* Isolate exact_match method
* Extract methods for local and remote results
* Simplify local vs remote and account isoliation
* Extract methods for local and remote results
* Simplify de-dupe of exact match
* Simplify logic to check for non exact remotes
* Cache some methods
* Remove nil from exact_match from results array
* Return exact matches first
* Use find_remote even with no domain
Account.find_local is just an alias for Account.find_remote(user, nil) - so we
can not bother with the conditional here, and call find_remote directly.
* Refresh local info for remote accounts when webfinger returns new values
It only refreshes account info if one of the URLs or the public-key changes,
in which cases it refreshes the full info, re-downloading the feeds from that
user.
Some special handling should probably be done when the public key changes,
but I have been unable to find any use for it in Mastodon yet.
* Re-fetch remote users we aren't subscribed to.
This might induce performance issues, we might want to only do that for users
we explicitly attempted to subscribe but failed to.
* Refactor changes
* Do not refresh existing remote account details more than once a day
* Avoid re-fetching webfinger info in tests unless otherwise specified
* Working translation for Norwegian.
* Fixes to Norwegian translation.
* Further adjustments to Norwegian translation.
* Further adjustments to Norwegian translation.
* Yet more improvements to the Norwegian translation.
* More Norwegian translations. Better terminology.
* Allow running mastodon on a different domain as the one used for identifying users
* Alter documentation of WEB_DOMAIN to make clear it shouldn't be used unless the admin knows what they are doing
* Compare to web_domain instead of local_domain when dealing with feeds/API
* Correctly identify mentions to local accounts
Mentions URLs point to the person's web profile, i.e., the user page served on WEB_DOMAIN.
* Add locale spec with failing locale plus region check
* Use a more accurate locale when supplied by browser headers
Previously we were using a matching option which would use the first locale
available which matched the locale portion, even if a region was specified.
This changes to first try to find an exact match, and then fall back to the
region, and then fall back to the default.
* Clean up default_locale method
* Simplify admin/reports controller filtering for index
* Rename parameter to resolved
* Fix issue where reports view could not access filter_link_to
* Add coverage for admin/reports controller
* DRY up resolution of related reports for target account
* Clean up admin/reports routes
* Add Report#statuses method
* DRY up current account action taken params
* Rubocop styles
When transmitting data in a HTML-encoded element like <content type="html" />,
relying on newlines being preserved is not wise, since HTML by itself
does not care for newlines - it cares for <p> and <br>
Additional fix: reset NSFW toggle after sending toot
m4sk1n
Yamagishi Kazutoshi
のら
abcang
Lynx Kotoura
Sorin Davidoi
unarist
nullkal
Jeroen
Eugen Rochko
Nolan Lawson
Sylvhem
Akihiko Odaki (@fn_aki@pawoo.net)
Damien Erambert
STJrInuyasha
Mantas
Quent-in
Shin Kojima
Minori Hiraoka
Gyuhwan Park
Naoki Kosaka
Midgard
ThibG
Alda Marteau-Hardi
PFM
Daniel Hunsaker
alpaca-tc
masarakki
Daigo 3 Dango
Gô Shoemake
nightpool
Ratmir Karabut
René Klačan
Matt Jankowski
Clworld
ふぁぼ原
May Kittens Devour Your Soul
Shunsuke Michii
IkUrA
lindwurm
Naoki Kosaka
Mingye Wang
takayamaki
caasi Huang
spla
Jack Jennings
Atsushi Yamamoto
ster
Masoud Abkenar
happycoloredbanana
Akinori MUSHA
Audun Larsen
beatrix
Ira
Tomonori Murakami
Immae
vidarlee
ButterflyOfFire
June Sallou
Stephen Burgess
geta6
Hiroaki Ninomiya
Kazuhiro NISHIYAMA
Paul
Wonderfall
Shel Raphen
Koala Yeung
AA4ch1
R Tucker
fusshi-
haoyayoi
Soshi Kato
HANATANI Takuma
yhirano
Jessica K. Litwin
Özcan Zafer AYAN
Ram Lmn
rch850
m4sk1n
gentaro
goofy-bz
Tomohiro Suwa
ヨイツの賢狼ホロ | 3rd style
kawax
Kaylee
Ash Furrow
hakoai
Giuseppe Pignataro
Alvina Putri
Noëlle Anthony
Hugo Gameiro
Patrick Figel
Ashley
Evan Minto
Lindsey Bieda
Benedikt Geißler
Francis Chong
Keiji, Yoshimi
JP DeVries
Guillaume Lo Re
Amelia
178inaba
Effy Elden
ymmtmdk
Joël Quenneville
mecab
Wesley Ellis
codl
Rachel H
Sebastian Morr
Takayoshi Nishida
ik-fib
Jérémy Benoist
Yeechan Lu
Andrey Blinov
Darshak Parikh
György Nádudvari
fsubal
matsurai25
Matteo Aquila
857b
Isabelle Knott
chrolis
Misty De Meo
Kota Ouchi
spf
839
Sam Hewitt
Zac Anger
Christophe Gesché
tom
Dale Price
Yuki Nakagawa
usagi-f
anon
saturday06
tackeyy
mshrtkch
Naouak
Erwan Leboucher
新都心(Neet Shin)
Marcin Cieślak
Henry Smith
Alex Dunn
Amakasu Ryoma
Fjoerfoks
Thor Harald Johansen
Joachim Viide
Luc Didry
西小倉宏信
maxypy
Thomas Citharel
Alyssa Ross
INAGAKI Hiroshi